TECHNICAL KNOWLEDGE BASE
JK Series
JK Series
Common Issues
What Type of Security Screw Is Used With the JK-DV/F Door Stations?
The “security screw” is a tamper-resistant TORX T-20 Security bit. The tamper-resistant version can be identified by the hole in the center of the driver, see below. Read More
All 4 LEDs Flashing on JK Master Station
Summary The four LEDs on the front of the JK-1MD/MED or JK-1HD blink right to left and then back, from left to right, in a rotating pattern. Cause This indicates a short between the A1-A2 (door station input/output), or the B1-B2 (sub-station input/output) wiring. Solution Check for loose, disconnected,… Read More
No Audio at Door Station but Video Works at Master Station
Summary During a call the user receives no audio at the door station, however, video works at the master station receiving the call. Cause A mismatch of door stations, incompatible door station with the master station. Solution Verify the model number of the master station. If the master… Read More
JKW-IP Software Troubleshooting
Summary If there is no video, audio, or call-in event (call tone) while using the JKW-IP software, there are several tests to determine the cause. Solution First, make sure the JK-1MD/1MED (master station) is powered on, on standby, and also that it is properly connected to the JKW-IP adaptor. Read More
Specifications
AC-10S Technical Specifications (Discontinued)
Line Drawing Specifications Power Source 12-24V AC or DC Current Consumption AC: 100mA (max.) DC: 70mA (max.) Number of Relays 2 Relay Contact Capacity 24V DC, 3A (resistive load) 1A (inductive load) 24V AC, 3A (resistive load) 1A (inductive load) Mounting Surface wall mount Protection Rating IP54 Operating… Read More
RY-1824L Technical Specifications
Line Drawing Specifications Features Normally open (N/O) contact with a high current rating for door strikes Normally closed (N/C) contact with high current for magnetic locks Use with any 18-24V system that requires door release Power Source Supplied by Master Station or CEU Contact Rating 250V AC, 8A… Read More
RY-ES Technical Specifications
Line Drawing Specifications Features Allows an external device to be triggered when the intercom is called External device will be activated when the door station calls in Power Source 12-24V DC, 12-16V AC – supplied by Master Station Contact Rating 125V AC, 1.0A 30V DC, 1.0A Compatible Stations… Read More
IER-2 Technical Specifications
Line Drawing Specifications Features Announces chime tone only Adjustable volume (3 positions) Indoor mounting Compatible Stations Call Extension Speaker for DB Series, JF Series, JK Series, JO Series, JP Series, KB Series, or NIM Series Mounting Surface mount directly to the wall or 1-gang box Dimensions 4-3/4″H x… Read More
MCW-S/B Technical Specifications
Line Drawing Specifications Features Allows desk mounting of master and / or handset station Mounting hardware included Station is propped up for easier viewing Pre-drilled mounting holes Constructed with sturdy ABS plastic Adjustable to 45° or 60° angles Compatible Stations AX-8M, AX-8MV, AX-8MV-W, DB-1MD, DB-1SD, GT-1A, GT-1C7, GT-1M3,… Read More
SBX-ACE Technical Specifications
Line Drawing Specifications Features Weather resistant Includes space inside for wiring Mounts to 1-gang box or ring Can mount directly to wall surface Material 18 gauge polished stainless steel Mounting Surface mount directly to the wall or 1-gang box Overall Dimensions 7-1⁄16″ H x 9-⅛” W x 4-¼”… Read More
KMB-45 Technical Specifications
Line Drawing Specifications Features 45˚ Mullion Mounting Bracket for C-D, GT-D, IF-DA, IX-BA, IX-DA, JO-DA, JP-DA, KB-DAR, KB-DAR-M, or LE-D Can mount to either right or left of the door Mounting Surface mount directly to the wall or mullion Dimensions 5-1/2” H x 5-1/2” W… Read More
MKW-P Technical Specifications
Line Drawing Specifications Features Adapts the JF-DV, JK-DV, JO-DV, and JP-DV surface mount door stations to a standard 1-gang box or ring Material Fire-retardant plastic Mounting Single-gang box Dimensions 7” H x 4” W x 3/8” D… Read More
KAW-D Technical Specifications
Line Drawing Specifications Features Provides a better viewing angle for the camera Compatible with Aiphone 1-gang surface mount door stations Angles 1-gang door stations outward by 30° Can mount to either right or left of door Hinged cover for mounting door station Material ABS Plastic Mounting Surface mount directly… Read More
JKW-BA Technical Specifications
Line Drawing Specifications Power Source 18V DC supplied by PS-1820UL Current Consumption 95mA (max.) Capacity 1 adaptor unit for video door station located beyond the standard specified wire distance Mounting DIN rail (included) Wire Type 2-conductor, low cap, PE, solid, non-shielded – use Aiphone #871802 wire Wire… Read More
JK-1HD Technical Specifications
Line Drawing Specifications Power Source 18V DC (Supplied by PS-1820UL) Current Consumption Maximum 200mA Communication Hands-free or Push-to-talk Screen 3.5″ TFT color LCD Wiring 4-conductor, PE insulation, Aiphone wire #871804 between stations Wiring Distance Door to farthest JK-1HD: 330′ Mounting Surface wall mount Electrical Box Single-gang box Operating Temperature… Read More
JKW-IP Technical Specifications
Line Drawing Specifications Power Source 18V DC supplied by JK Series Master Station Network Interface 10 BASE-T/100 BASE-TX Ethernet (RJ-45) Network Protocols TCP, UDP, HTTP, SIP, SMTP Bandwidth Usage 320Kbps to 8Mbps (per JKW-IP) Minimum Requirements OS: Windows® XP (SP2), Windows Vista® (32/64 bit), Windows® 7 (32/64 bit),… Read More
JK-DVF-AC Technical Specifications
Line Drawing Specifications Power Source 18V DC supplied by JK Series Master Station Keypad requires separate 12~24V AC/DC power supply Current Consumption AC: 100mA (max.) DC: 70mA (max.) Communication Hands-free Camera 1/4″ CMOS Camera Angle Wide: 170°(approx.) (Horizontal) Minimum Illumination 5 lux Relay Contact 24V DC, N/O or… Read More
JK-DVF-HID Technical Specifications
Line Drawing Specifications Power Source 18V DC supplied by JK Series Master Station Communication Hands-free Camera 1/4″ CMOS Camera Angle Wide: 170°(approx.) (Horizontal) Card Reader HID® ProxPoint® Plus Proximity Card Reader Minimum Illumination 5 lux Wiring 2-conductor, PE insulation, Aiphone wire #871802 Wiring Distance 165′ (22 AWG)… Read More
JK-DVF Technical Specifications
Line Drawing Specifications Power Source 18V DC supplied by JK Series Master Station Communication Hands-free Camera 1/4″ CMOS Camera Angle Wide: 170°(approx.) (Horizontal) Minimum Illumination 5 lux Wiring 2-conductor, PE insulation, Aiphone wire #871802 Wiring Distance 165′ (22 AWG) 330′ (18 AWG) Mounting Flush mount or surface mount… Read More
JK-DV Technical Specification
Line Drawing Specifications Power Source 18V DC supplied by JK Series Master Station Communication Hands-free Camera 1/4″ CMOS Camera Angle Wide: 170°(approx.) (Horizontal) Minimum Illumination 5 lux Wiring 2-conductor, PE insulation, Aiphone wire #871802 Wiring Distance 165′ (22 AWG) 330′ (18 AWG) Mounting Surface wall mount Electrical Box… Read More
JK-DA Technical Specifications
Line Drawing Specifications Power Source 18V DC supplied by JK Series Master Station Communication Hands-free Camera 1/4″ CMOS Camera Angle Wide: 170°(approx.) (Horizontal) Minimum Illumination 5 lux Wiring 2-conductor, PE insulation, Aiphone wire #871802 Wiring Distance 165′ (22 AWG) 330′ (18 AWG) Mounting Surface wall mount Electrical Box… Read More
JK-1SD Technical Specifications
Line Drawing Specifications Power Source 18V DC (Supplied by PS-1820UL) Current Consumption Maximum 120mA Communication Hands-free or Push-to-talk Wiring 4-conductor, PE insulation, Aiphone wire #871804 between stations Wiring Distance Door to farthest master or sub master station: 330′ Mounting Surface wall mount Electrical Box Single-gang box Operating Temperature 32°… Read More
JK-1MED Technical Specifications
Line Drawing Specifications Power Source 18V DC (Supplied by PS-1820UL) Current Consumption Maximum 400mA Communication Hands-free or Push-to-talk Screen 3.5″ TFT color LCD Picture Memory 40 pictures Wiring 4-conductor, PE insulation, Aiphone wire #871804 between stations Door Release Contact 24V AC/DC, 0.5A (N/O dry contact closure) Wiring Distance Door… Read More
Tips
What Type of Security Screw Is Used With the JK-DV/F Door Stations?
The “security screw” is a tamper-resistant TORX T-20 Security bit. The tamper-resistant version can be identified by the hole in the center of the driver, see below. Read More
Wiring Diagrams
Wiring: JK-1MED with JKW-BA Long Distance Adaptor
Wiring Diagram Use the long distance adaptor JKW-BA within the distance ranges shown in the section below. Wiring Distances A 330′ (22AWG) or 650′ (18AWG) B 165′ (22AWG) or 330′ (18AWG) C 165′ (22AWG) or 330′ (18AWG) D 16′ (22AWG) or… Read More