NHX:
Nurse Center

 

 

NHX Nurse Call System

 

Features (Back to top)

UL 1069 Listed Nurse Call System.
One 50-call master station, with optional 30-call add-on for up to 80 patient stations.
Microprocessor based.
Three levels of call-in (routine call, bathroom call & cord out call) with priority according to urgency and time of call.
Single and dual patient stations.
Bedside call cords, bathroom call stations, and corridor lamps.
Common Area call stations
Duty Station
4-Zone indicator lamp
Simple common wiring in groups of 10 stations
Use QuikSpec to design this system.
 

 

Product Photos (Back to top)

Click picture to view larger image. Use the "Back" button on your browser to return to this page. Click picture to view larger image. Use the "Back" button on your browser to return to this page. Click picture to view larger image. Use the "Back" button on your browser to return to this page. Click picture to view larger image. Use the "Back" button on your browser to return to this page. Click picture to view larger image. Use the "Back" button on your browser to return to this page.
NHX-50M NH-1SA/A NH-2SA/A NHR-3TS NHR-7A
Click picture to view larger image. Use the "Back" button on your browser to return to this page. Click picture to view larger image. Use the "Back" button on your browser to return to this page. Click picture to view larger image. Use the "Back" button on your browser to return to this page. Click picture to view larger image. Use the "Back" button on your browser to return to this page. Click picture to view larger image. Use the "Back" button on your browser to return to this page.
NHR-3A-4 NHR-4A NHX-30G NHR-SP NHX-80X

 

Specifications (Back to top)
Power Source 24V DC, 4A maximum. *Use 2 PS-2420UL for CCU. One additional PS-2420UL per two NHR-3A-4 Zone Lamps included in the system.
Station
Capacity
1 Master Station
Up to 80 Addressable Stations (Patient Stations and Common Area Call Stations)
Call-in Priority 1. Cord-out trouble call (cord pulled out of patient station)
2. Call from bathroom pullcord station (NHR-7A)
3. Routine Call (when call cord button is pressed at patient station)
Talk Channel 1 Talkpath,  private
Wiring CCU to Master:
5 Pair, 22 AWG, shielded (Use Aiphone #862210)
Trunk Line from CCU to Patient Stations:
4 Pair, 22 AWG, shielded, max. 10 patient stations per trunk line 
(Use Aiphone #862208)

Bathroom pullcord and Corridor Lamp to Patient Stations:
3 Conductor Homerun from each (Use Aiphone #822203)
Wiring
Distance
CCU to Master: 65' with #862210
Trunkage Line (CCU to farthest Patient Station): 165' with #862208
Total wire used on each trunk line must not exceed 330' max. 10 stations per trunk line.
CCU to Duty Station: 65' with #862208
CCU to Zone Light: 165' with 18AWG
CCU to Power Supplies: 16' with 18AWG

 

Click here to QuikSpec this system
Use QuikSpec to design an NHX Nurse Call system. (Back to top)

 

Literature Available (Back to top)

NHX Guideline Specifications
NHX System Layout Guide
NHX-50M Spec Sheet
NHX-80X Spec Sheet
NHR-30G Spec Sheet
NH-1SA/2SA Spec Sheet
NHR-3TS Spec Sheet
NHR-SP Spec Sheet
NHR-7A Spec Sheet
NHR-8A Spec Sheet
NHR-4A Spec Sheet
NHR-3A-4 Spec Sheet
NH-50AC All Call Adaptor
NHX-50WB Wall Mounting Bracket
PS-2420UL Spec Sheet
NHX Instruction Manual
NHX Operation Manual

For additional information contact your Aiphone Representative.
For best results use Internet Explorer or Netscape Navigator 4.0 or above.
For comments about this site: webmaster@aiphone.com
Copyright 2002 by Aiphone Corporation - All rights reserved.

Got  questions?

Use "QuikFAQ" to get instant answers!

Click the logo below to get started.