IE-1AD:
Chime-Tone 
Intercom

IE-1AD Chime Tone Intercom

 

Features (Back to top)

Single room station for one door.
Door release control.
Chime extension speaker or relay can be added.
AC or DC powered.
Use QuikSpec to design this system.

 

Product Photos (Back to top)

Click picture to view larger image. Use the "Back" button on your browser to return to this page. Click picture to view larger image. Use the "Back" button on your browser to return to this page. Click picture to view larger image. Use the "Back" button on your browser to return to this page.
IE-1AD IE-Doors IER-2

 

Specifications  (Back to top)
Power Source 12 ~ 16V AC, 180mA (Use PT-1210N).
12 ~ 24V DC, 160mA.
Power Supply AC transformer, 12 ~ 16V, 550mA common for IE-1AD & EL-9S.
Communication 4-tone chime w/volume control.  Pick up handset to reply.
Wiring 2 wires, parallel, non-polarized, plus 2 for door strike. (Use Aiphone #822202.)
Distance 500' with 22AWG.  1200' with 18AWG.

 

Click here to QuikSpec this system
Use QuikSpec to design an IE Handset system  (Back to top)

 

Literature Available (Back to top)

IE-1AD Instructions
IE Door Station Instructions
TAR-3 Call Extension Relay Spec Sheet
TAR-3 Call Extension Relay Instructions
PT-1210N 12V AC, 830mA Transformer Spec Sheet
IER-2 Instructions
IE-SSV Vandal resistant Sub Station with built-in pinhole camera
IE-SS/IE-SSR 2-Gang Stainless Steel
Brass Door Station Covers Spec Sheet

Modifications Available (Back to top)

Aiphone has always recognized that there are features and functions that our products don't have. In response we've created a manual detailing the in-field customization of our units to do some of  the more frequently requested functions. Called the "Modification Manual"  and now in it's fifteenth year, it has been an invaluable source of knowledge for in field technicians. It is available free of charge for the first time here.

All modification are in PDF format and are broken down into 5 levels, based on their difficulty:

Level 1 - Easy - Wire Connection Only
Level 2 - Easy/Moderate - Component Connection to External points
Level 3 - Moderate - Removal and replacement of internal Components
Level 4 - Moderate/Hard - Internal connection or component addition
Level 5 - Hard - Circuit Creation and Internal Addition

Please note that modifying a unit will not void it's warranty unless while doing the modification you damage the unit. Aiphone is not liable for any damaged caused during modification. Modifications should only be performed by a person with the skills and knowledge necessary to successfully complete the modification.

MODIFICATION: DIFFICULTY LEVEL:
External signaling of the IE-1AD 2 - Easy/moderate

For additional information contact your Aiphone Representative.
For best results use Internet Explorer or Netscape Navigator 4.0 or above.
For comments about this site: webmaster@aiphone.com
Copyright 2002 by Aiphone Corporation - All rights reserved.

Got  questions?

Use "QuikFAQ" to get instant answers!

Click the logo below to get started.