QuikSpec MarketCom

Specifying a MarketCom System

Tell us about your application by answering the following questions, and we'll provide you with a list of Aiphone products to meet your requirements.

To specify a different system, click here.

Refer to our Terminology page for a complete definition of each type of intercom station.

Step 1: Handset Stations:

How many of each of the following style of stations does the system require?:

	Wall Mount stations?: (MC-60/4A)
	Desk Mount stations?: (MC-60/4B)

Step 2: Overhead Paging Zone
The MarketCom system requires a paging adaptor (MC-A/A) and an Amplifier. Paging is the only method of alerting other parties of the need to communicate over the MarketCom intercom stations.

Aiphone Amplifiers available
(Choose the amplifier with the necessary wattage output for your paging zone):

15 Watt Amp (Model T3115BGM)
30 Watt Amp (Model T3130BGM)
60 Watt Amp (Model DMA2060)
120 Watt Amp (Model DMA2120)
Using a brand of Amplifier other than Aiphone

Step 3: Optional Features (Check all that are required)

	12" Pedestal Stand (to mount MC-60/4A next to a cash register)
	23" Pedestal Stand (to mount MC-60/4A next to a cash register)

Step 4: Specify The System:
By pressing the "QuikSpec It!" button below, an Aiphone handset system equipment list will appear based on your input requirements. To change capacities, style of stations, or features of the system you are designing, simply return to this page, make the change on the form above and press the "QuikSpec It!" button again.

NOTE: This is a system design aid only. Final design, quantities, features and functions of the system are the sole responsibility of the person receiving this quote. To ensure that the wire type and wiring distances of your system are within specifications, go to the MC-60/4 product page. For information on Aiphone speakers, go to SP-5N Specification sheet or the Horn Specification sheet. Use Aiphone #852207 wire for your system, which offers an additional one year warranty.

For additional assistance with design or installation of your system, please contact Technical Support.