TD-H/B:
w/PanTilt Video
 |
Add video door answering to the TD-H system with MY-CU Monitor. |
|
Add up to two PanTilt doors with MYW-P3CB and MYH-CU monitor(s). |
|
Up to two monitors on a system with one power supply, expandable with additional power. |
|
Selective door release, intercom, and paging integrated into one system. |
|
Troubleshooting FAQ's on TD-H System |
|
Use QuikSpec to design this system. |
| |
 |
 |
| TD-12H/B With MY-CU | MK-DAC | MK-DBC |
 |
 |
 |
| MK-DGC | MYW-BA | IE-Doors |
| Power Source | TD-H/B: 12V DC, 70mA per station. *Use
PS-1225UL power supply for entire system. MY-CU and two MYH-CU's: 18V DC, 1.7A. *Use PS-1820UL. |
| Communication | Call-in with intermittent tremolo and video, 45 seconds (rings up to 12 phones). Pick up any handset and select station number to answer. |
| Wiring | 2 conductor, 18AWG, non-shielded to PanTilt
door (Use Aiphone #871802.) 6 wires from MY-CU to MYH-CU(s), looped (Use Aiphone #871806.) See TD-H for more audio system information. |
| Distance | MY Door to MY Monitor or Adaptor: 165' with
22AWG, 330' with 18AWG. Up to 980' with MYW-BA and wire #851602. Adaptor or Monitor to last Monitor: 115' with 22AWG, 245' with 18AWG. For distances up to 980', use MYW-BA-M adaptor and wire #851602. |
Use QuikSpec to design a TD-H Handset
Intercom system
(Back
to top)
Literature Available (Back to top)
 |
T3115BGM and T3130BGM Amplifier Instructions |
|
DMA2060 and DMA2120 Amplifier Instructions |
For additional information contact your Aiphone Representative.
For best results use Internet Explorer or
Netscape Navigator 4.0 or above.
For comments about this site: webmaster@aiphone.com
Copyright 2002 by Aiphone Corporation - All rights reserved.
