TC-M:
With
PanTilt Video
 |
Video entry communication and PanTilt control for up to 10 door or gated entrance areas. |
|
Video door stations or Audio-only doors can be used. |
|
Automatic audio and video scanning of entry doors for up to 60 minutes, with adjustable duration of 10, 20 or 30 seconds at each door station. |
|
Video output to standard CCTV monitor or recording device. |
|
Use QuikSpec to design this system. |
 |
 |
 |
| TC-10M | TB-ADM10 | MK-DAC |
 |
 |
 |
| MK-DBC | IE-Doors | TB-SE |
| Specifications (Back to top) | |
| Power Source | 18V DC, 700mA maximum. *Use PS-1820UL power supply. |
| PanTilt Door Capacity | 10 including IE/IF audio-only door stations. |
| Call-in Timer | 40 seconds. |
| Monitor Timer | 2-1/2 minutes on MYH-CU. |
| Auto-Scan Timer | 60 minutes maximum with duration of 10, 20 or 30 seconds per each location. Press MONITOR button for 2 seconds to initiate. |
| Wiring | 2 conductor, 18AWG, non-shielded (Use Aiphone #871802). 6 wires from TB-ADM10 to MYH-CU (Use Aiphone #871806). |
| Distance | MY door to TB-ADM10: 165' with 22AWG, 330' with 18AWG. Up to 980' with MYW-BA Adaptor and wire #851602 (per video door over 330'.) |
Use QuikSpec to design a
TC-M Internal
Telephone Intercom system
(Back to top)
Literature Available (Back to top)
For additional information contact your Aiphone Representative.
For best results use Internet Explorer or
Netscape Navigator 4.0 or above.
For comments about this site: webmaster@aiphone.com
Copyright 2002 by Aiphone Corporation - All rights reserved.
