NDR:
Lamp Memory
With Access &
Camera
Control
 |
Expandable to 120 stations. |
|
Built-in All Call amplifier. |
|
Call-in LED and tone remain until call is answered. |
|
Selective control of remote devices with RY-PA relay for each function. |
|
Door release (selective momentary contact). |
|
Camera call-up (selective maintained contact). |
|
Control of any device or system controlled by relay. |
|
Control of dual devices off of the same channel. |
|
Use QuikSpec to design this system. |
 |
|
 |
 |
 |
|
| NDR-10A | NDR-10 | NE-NVP/B | NA-A | NA-AN | |
 |
 |
 |
 |
|
|
| NA-NE | NA-T/A | NE-SS | NE-SSR | SBX-2G |
| Specifications (Back to top) | |
| Power Source | 24V DC, 45W maximum. 2.5W (standby). *Use PS-2410A for NDR-10 or NDR-20, or PS-2420UL for NDR-30 or NDR-40. |
| Communication | Pretone and voice at sub when selected. Sub call-in tone and LED remain, tone muted when in communication. Press and release Talk/Listen and/or use handset (voice activated). |
| Output | 500mW maximum, adjustable. All Call: Press ALL CALL switch (6W for 10/20, 12W for 30/40). Group call up to 10 subs with ind. select switches pressed, then press TALK switch (3W). |
| Wiring | 1 common wire plus 1
individual wire per sub station looped (Aiphone #8222xx
wire (xx = # of conductors))., or 2
wires homerun from each sub station (Aiphone #822202
(22AWG) or #821802 (18 AWG)). Separate 2 conductor to RY-PA and external device (Aiphone #822202 (22AWG) or #821802 (18 AWG)). |
| Distance | 420' with 22AWG, 1000' with 18AWG. |
Use QuikSpec to design an NDR Intercom
& Access Control system
(Back to top)
Literature Available (Back to top)
 |
T3115BGM and T3130BGM Amplifier Instructions |
|
DMA2060 and DMA2120 Amplifier Instructions |
| Aiphone
has always recognized that there are features and functions that our
products don't have. In response we've created a manual detailing the
in-field customization of our units to do some of the more
frequently requested functions. Called the "Modification Manual"
and now in it's fifteenth year, it has been an invaluable source of
knowledge for in field technicians. It is available free of charge for the
first time here.
All modification are in PDF format and are broken down into 5 levels, based on their difficulty: Level 1 - Easy - Wire Connection
Only Please note that modifying a unit will not void it's warranty unless while doing the modification you damage the unit. Aiphone is not liable for any damaged caused during modification. Modifications should only be performed by a person with the skills and knowledge necessary to successfully complete the modification. | |
For additional information contact your Aiphone Representative.
For best results use Internet Explorer or
Netscape Navigator 4.0 or above.
For comments about this site: webmaster@aiphone.com
Copyright 2002 by Aiphone Corporation - All rights reserved.
