MY-CU-PH:
Video
Door With
Panasonic̉ Phone
 |
One or two MK or MY-series Black & White Video Door Stations. |
|
Answer a visitor’s call from any telephone in the system. |
|
Adjust the camera’s angle with the PanTilt control. |
|
Listen to the outside area at any time from the phone. |
|
Works with Panasonic® Advanced Hybrid or Digital phone systems that use the following Doorphone adaptors: KX-TA62460 or KX-TD160. |
|
 |
| MY-CU-PH | MYH-CU |
 |
 |
| MK-DAC | MK-DBC |
| Specifications (Back to top) | |
| Power Source | 18V DC. Use
PS-1820UL for initial three video monitors. Use PS-1820UL for each additional two monitors. |
| Communication | Through designated Panasonic phone system. |
| Current Consumption | MY-CU-PH: Standby: 0.12A; Max.
0.9A. MYH-CU: Standby: 0.0A; Max. 0.4A. |
| Calling: | Monitors turn on and telephones ring. |
| Scanning Lines: | 525 Lines. |
| Wiring | 2 conductor, 18AWG, non-shielded
(Use Aiphone #871802.) 6 wires, looped to Monitors. (Use Aiphone #871806.) 4 wires to phone system (audio). |
| Wiring Distance: | MY Camera to MY-CU-PH: 330’
with 18AWG wire. MY-CU-PH to last MYH-CU: 245’ with 18AWG wire. PS-1820UL to MY-CU-PH: 16’ with 18AWG wire. (Use Aiphone #871802.) |
| Mounting: | Surface mounts to 2-gang box. |
Literature Available (Back to top)
For additional information contact your Aiphone Representative.
For best results use Internet Explorer or
Netscape Navigator 4.0 or above.
For comments about this site: webmaster@aiphone.com
Copyright 2002 by Aiphone Corporation - All rights reserved.
