MKS-1GD
MKS-1GDV
MKS-1GDVF
Door Sentry Sets
 |
MK-DVF-HID Door station features an embedded HID Card reader with Wiegand output to access panel (Available second Quarter, 2006) |
|
Door call-in LED |
|
Extra dry contact |
|
Video and audio turn on when door calls in |
|
Door Call Transfer |
|
Redesigned monitors |
|
Two additional monitor (MK-1HD) or handset only (MK-2SD) stations can be added |
|
Simple 2-wire hook up -- Can replace existing doorbell |
|
4 or 6 wires between inside monitors (based on distance) |
|
Handset for two-way communication at inside station |
|
Hands free communication at the door station |
|
Infrared, CCD camera for low light applications |
|
Built-in video output (requires additional equipment) |
|
All call between inside stations |
|
One power supply for entire system |
|
Activate door strike from inside station(s) |
|
Wide angle CCD cameras |
|
Three sets include new video door
stations. All sets include one MK-1GD master monitor and one PS-1820UL power supply: MKS-1GD: MK-DH Surface mount, ABS Plastic MKS-1GDV: MK-DV Surface mount, vandal resistant with zinc cast faceplate MKS-1GDVF: MK-DVF, Flush mount, vandal resistant with stainless steel faceplate |
|
Video picture memory can be added to a new or existing system with the KC-32EU. |
|
Use QuikSpec to design this system. |
Product Photos
(Back to top)
Click image for a detailed description of the product
 |
 |
 |
 |
| Boxed Sets | MK-1GD | MK-1HD | MK-2SD |
 |
 |
 |
 |
| MK-DVF | MK-DV | MK-DH | KVI |
| Specifications (Back to top) | |
| Power Source | 18V DC, 0.8A. 0.04A standby. *Use PS-1820UL power supply. |
| Scanning Line | 525 lines. |
| Image Viewing Area | 2'1" vertical, 3'1" horizontal at 20" from camera. |
| Minimum Illumination | 1 Lux at 20". |
| Monitor Type | 4" Direct View Flat CRT |
| Wiring | 2 conductor, 18AWG, non-shielded (Use Aiphone #871802.) |
| Distance | Video Door Station to Master
Monitor: 650' with 18AWG Master Monitor to Farthest Sub: 245' with 18AWG Master Monitor to Power Supply: 33' with 18AWG |
The MK-1GD series has installation
drawings available using the QuikDraw program. After using QuikSpec, simply
click the QuikDraw logo on the output page to view a custom diagram for your
system.
Literature Available (Back to top)
All modification are in PDF format and are broken down into 5 levels, based on their difficulty:
Level 1 - Easy - Wire Connection
Only
Level 2 - Easy/Moderate - Component Connection to External points
Level 3 - Moderate - Removal and replacement of internal Components
Level 4 - Moderate/Hard - Internal connection or component addition
Level 5 - Hard - Circuit Creation and Internal Addition
Please note that modifying a unit will not void it's warranty unless while doing the modification you damage the unit. Aiphone is not liable for any damaged caused during modification. Modifications should only be performed by a person with the skills and knowledge necessary to successfully complete the modification.
| MODIFICATION: | DIFFICULTY LEVEL: |
| External signaling for the MK-1GD | 4 - Moderate/hard |
For additional information contact your Aiphone Representative.
For best results use Internet Explorer or
Netscape Navigator 4.0 or above.
For comments about this site: webmaster@aiphone.com
Copyright 2003 by Aiphone Corporation - All rights reserved.
