KB 3x5 Video:
3
Video Doors
5 Monitors
 |
Up to three video door stations (KB-DAR) . |
|
Up to five inside stations (KB-3MRD main room station and up to four KB-3HRD sub room stations). |
|
Video images from door station(s) can be recorded with the KC-32EU (1 per video door station). |
|
Selective calling and All Call between inside stations. |
|
Hands free Audio and Video monitoring. |
|
Compact surface mount color video door station (KB-DAR). |
|
Adjust vertical angle of camera for better viewing. |
|
Illuminating LED's for low light conditions. |
|
Selectively release each door with adaptor (RY-3DL). |
|
Use the following cables
only: Aiphone 871802, West Penn D990 Atlas 202-18-1-2J |
|
Use QuikSpec to design this system. |
 |
|
 |
 |
| KB-DAR | KB-3HRD | KB-3SD | KC-32EU |
| Specifications (Back to top) | |
| Power Source | 24V DC, supplied by
PS-2420UL. KB-3MRD: 860mA. 220mA standby. KB-3HRD: 410mA. 80mA standby. KB-3SD: 85mA. 50mA standby. Use one PS-2420UL for every two monitors in the system. |
| Video Monitor | 4" TFT color LCD |
| Call-in from Door | 4-stroke chime from door #1, 2-stroke chime from door #2, fast 8-stroke chime from door #3 (audio/video or audio-only) |
| Internal Calling | Pretone then
voice when making an All Call to inside stations. Double pretone then voice when selectively calling an inside station. Hands free reply from responding station. |
| Night Viewing | Built-in light is projected up to 12" from camera. Outside area beyond 12" cannot be seen. |
| Door Release | Contact rating: 12V AC, 400mA.
(Single door release contact) Selective door release with RY-3DL adaptor |
| Wiring | 2 wires to door
station, parallel, non-polarized, fire-rated. (Use Aiphone 871802, West Penn D990 or Atlas 202-18-1-2J wire only.) 2 wires between rooms, looped, plus a separately jacketed 2 conductor wire from power supply to each monitor, homerun. (Use West Penn D990 wire for video signal, plus separate 2 conductor wire for power to each monitor in the system.) |
| Distance | KB-3MRD to door: 650' with 18AWG. KB-3MRD to IE/IF Door: 450' with 22AWG wire, 1,000' with 18AWG. KB-3MRD to last KB-3HRD: 330' with 18AWG, Use West Penn D990 or Atlas 202-18-1-2J wire. Daisy-chain wire between monitors, and homerun additional separate pairs from power supplies to each monitor (2 monitors per PS-2420UL). With common power wires: Max. distance between monitors is 165' with 18AWG. |
Use QuikSpec to design
a Color Video Entry system (Back to top)
The KB series has installation
drawings available using the QuikDraw program. After using QuikSpec, simply
click the QuikDraw logo on the output page to view a custom diagram for your
system.
Literature Available (Back to top)
For additional information contact your Aiphone Representative.
For best results use Internet Explorer or
Netscape Navigator 4.0 or above.
For comments about this site: webmaster@aiphone.com
Copyright 2002 by Aiphone Corporation - All rights reserved.
