IE-1GD/IE-2AD:
Chime-Tone 
Intercom

IE-1GD/IE-2AD Chime Tone Intercom

 

Features (Back to top)

One or two audio doors, with 4-tone and 2-tone chimes.
Up to four inside stations.
Internal calling and communication. 
Chime tone can be muted at IEH-1CD room stations.
Door selector button on IE-2AD.
AC or DC powered.
Add video with additional equipment.
Use QuikSpec to design this system.
 

 

 

Product Photos (Back to top)

Click picture to view larger image. Use the "Back" button on your browser to return to this page. Click picture to view larger image. Use the "Back" button on your browser to return to this page. Click picture to view larger image. Use the "Back" button on your browser to return to this page. Click picture to view larger image. Use the "Back" button on your browser to return to this page. Click picture to view larger image. Use the "Back" button on your browser to return to this page.
IE-1GD IE-2AD IEH-1CD IE-Doors IER-2

 

Specifications  (Back to top)
Power Source 12 ~ 16V AC, 200mA.
12 ~ 24V DC, 200mA.
Power Supply AC transformer, 12 ~ 16V, 550mA, common for IE & EL-9S (Use PT-1210N).
Communication 4-tone chime from door one, or 2-tone chime from door two (IE-2AD), with chime volume control.
Pick up any handset to reply.
Call the other inside stations by tone.
Wiring 2 wires, parallel, non-polarized, plus separate 2 wires for door strike. (Use Aiphone #822202.)
6 wires looped to room stations. (Use Aiphone #822210.)
Distance Door to Main Station: 500' with 22AWG, 1200' with 18AWG.
Main to farthest IEH-1CD: 250' with 22AWG, 620' with 18AWG.

 

Click here to QuikSpec this system
Use QuikSpec to design an IE Handset system  (Back to top)

 

Literature Available (Back to top)

IE-1GD Instructions
IE-2AD Instructions
IE Door Station Instructions
RY-3DL Selective Door Release Adaptor Spec Sheet
RY-3DL Selective Door Release Adaptor Instructions
TAR-3 Call Extension Relay Spec Sheet
TAR-3 Call Extension Relay Instructions
PT-1210N 12V AC, 830mA Transformer Spec Sheet
IER-2 Instructions
IE-SSV Vandal resistant Sub Station with built-in pinhole camera
IE-SS/IE-SSR 2-Gang Stainless Steel
Brass Door Station Covers Spec Sheet

Modifications Available (Back to top)

Aiphone has always recognized that there are features and functions that our products don't have. In response we've created a manual detailing the in-field customization of our units to do some of  the more frequently requested functions. Called the "Modification Manual"  and now in it's fifteenth year, it has been an invaluable source of knowledge for in field technicians. It is available free of charge for the first time here.

All modification are in PDF format and are broken down into 5 levels, based on their difficulty:

Level 1 - Easy - Wire Connection Only
Level 2 - Easy/Moderate - Component Connection to External points
Level 3 - Moderate - Removal and replacement of internal Components
Level 4 - Moderate/Hard - Internal connection or component addition
Level 5 - Hard - Circuit Creation and Internal Addition

Please note that modifying a unit will not void it's warranty unless while doing the modification you damage the unit. Aiphone is not liable for any damaged caused during modification. Modifications should only be performed by a person with the skills and knowledge necessary to successfully complete the modification.

MODIFICATION: DIFFICULTY LEVEL:
External signaling of the IE-1GD/2AD 2 - Easy/moderate
Change IE-1GD or IE-2AD contacts to Normally Closed 3 - Moderate

For additional information contact your Aiphone Representative.
For best results use Internet Explorer or Netscape Navigator 4.0 or above.
For comments about this site: webmaster@aiphone.com
Copyright 2002 by Aiphone Corporation - All rights reserved.

Got  questions?

Use "QuikFAQ" to get instant answers!

Click the logo below to get started.