GF:
Multi-Unit
Audio Only
Entry System
To view a component matrix of common entrance panels, click here!
 |
One to five entrance
panels and 250 tenant locations (Note wire distance specifications on larger systems) |
|
Digital entrance panel kits available for easy designing, selling, and installation |
|
Simple wiring with only 2 common wires run throughout the system (see specifications below) |
|
Entrance panels with individual call buttons are designed modularly, allowing each panel to be configured with the appropriate number of buttons. |
|
Up to two inside handset stations for easy communication with visitor |
|
Access control from inside station to calling entrance (door release) |
|
Optional individual doorbell to ring handset station |
|
Door release timer (5~20 seconds), allowing easy entry of postal or delivery workers |
|
Security Guard or Concierge Station can be included to provide communication from office/lobby to tenants. |
|
Panic call switch can be added to tenant locations for emergency calling to guard/concierge. |
|
QuikSpec the GF system |
| Power Source | 24V DC, 0.7A Max. (30mA in standby) Use PS-2410LC only. |
| Power Supply | PS-2410LC to GF-BC |
| Station Capacity | 100 locations (with individual buttons). Up to 250 locations with digital entrance panel. (Max. 250 total room stations.) |
| Entrance Stations | 1 to 5 |
| Apartment Station | Max. two audio-only stations per apartment (Max. 250 GF-1D's per system. Note total cumulative wire distance specification for larger systems.) |
| Calling Tones | Electronic ring
tone from entrance station(s) Differentiated ring tone from individual doorbell |
| Door Release Contact | 4A at 24V AC/DC (EL, EL terminals on GF-DA, dry closure) |
| Wiring | 2-wire common
bus wiring from Entrances to GF-BC 2-wire common bus wiring from GF-BC to GF-1D's Max. 50 stations on a trunk line. Run audio wires in T-tap fashion to minimize wire distance in larger applications. Total wire distance specification is cumulative, adding all physical audio wire in the system. Maintain total distance of under 8,200 feet (1.5 miles). It is not recommended that the audio wire be homerun to an equipment room in larger applications where wire distance specification may be exceeded. |
| Wire | Use Aiphone wire
#872002. 2 conductor,
solid copper, Non-shielded, polyethylene insulation, 20 AWG. NOTE: Proper operation or warranty for the system is not guaranteed with any other type of wire. |
| Distance | GF-BC to
Junction Point: 16' with 20AWG GF-BC to PS-2410LC: 16' with 20AWG Junction Point to farthest Apartment: 980' with 20AWG Junction Point to farthest Entrance(s): 980' with 20AWG Total cumulative audio wire (R1, R2) distance must not exceed 8,200' per system with 20AWG wire. (Equivalent to 1.5 miles and 2.5 km.). |
ENTRANCE PANEL
KITS:
(Kit includes the modular components needed to create a complete
entrance station. Assembly at installation is required.)
| MODEL | DESCRIPTION |
| GFA-DES | 10- Key Audio-Only Entrance Panel for systems without a concierge station |
Entrance Panel Modular Components:
Use these part numbers for ordering
an entrance panel with an exact number of call buttons.
See product brochure or
instructions, or contact
Technical Support for assistance. Please refer to the GF
QuikSpec page for online assistance with specifying the correct
components for
your system. To view an entry panel component
matrix, click here.
| Model | Description |
| GF-NS/A | Digital LCD Display Module |
| GF-NSP | LCD Display Module Panel |
| GF-10K | 10- Key Module |
| GF-10KP | 10-Key Module Panel |
| GF-DA/B | Speech Module |
| GF-DP | Speech Module Panel |
| GF-SW | Call Switch Module |
| GF-1P | 1- Call button Panel |
| GF-2P | 2-Call button Panel |
| GF-3P | 3-Call button Panel |
| GF-4P | 4-Call button Panel |
| GF-BP | Blank Panel |
| GF-AD | Address Module |
| GF-AP | Address Panel |
| GF-2F | 2-module front frame |
| GF-3F | 3-module front frame |
| GF-2B | 2-module back box |
| GF-3B | 3-module back box |
| GF-102H | 2 Module Rain Hood (1H x 2V) |
| GF102HB | 2 Module Surface Mount Rain Hood (1H x 2V) |
| GF-103H | 3 Module Mount Rain Hood (1H x 3V) |
| GF-103HB | 3 Module Surface Mount Rain Hood (1H x 3V) |
| GF-202H | 4 Module Mount Rain Hood (2H x 2V) |
| GF-202H | 4 Module Surface Mount Rain Hood (2H x 2V) |
| GF-203H | 6 Module Mount Rain Hood (2H x 3V) |
| GF-203HB | 6 Module Surface Mount Rain Hood (2H x 3V) |
Additional Equipment Required:
| MODEL | DESCRIPTION |
| GF-1D | Audio handset with door
release for systems without concierge station (1 or 2 per apartment, max 150 handsets per system) |
| GF-1DS | Audio handset with door
release and extra contact for systems without concierge station (1 or 2 per apartment, max 150 handsets per system) |
| GF-1DK | Audio handset with door
release for systems with concierge station (1 or 2 per apartment, max 150 handsets per system) |
| GF-MK | Concierge Station Max two per system. Requires use of: GF-1DK Audio Handset GF-DS/B Audio module |
| GF-BC | Bus Control Unit (1 per system) |
| PS-2410LC | Power supply (1 per system) |
Additional Optional Equipment :
| MODEL | DESCRIPTION |
| GF-C | 30" Connecting Wire (optional, for large entrance panels with audio module installed in center of panel.) |
| RY-24L | Form "C" door release relay |
| GF-OP2 | 2 panel postal lock |
| GF-OP3 | 3 panel postal lock |
| GFW-S | Desk stand for GF-MK |
| GFK-PS | Panic Call Switch |
| MAW-B | External Light Relay |
Literature Available (Back to top)
|
IMPORTANT! Please read the GF-NS/A software setup instructions before using the software |
|
 |
GF-NSA Software Setup Instructions |
|
Original Program for installing Names & Numbers in GF-NS (Digital Entry Panel only) |
For additional information contact your Aiphone Representative.
For best results use Internet Explorer or
Netscape Navigator 4.0 or above.
For comments about this site: webmaster@aiphone.com
Copyright 2002 by Aiphone Corporation - All rights reserved.
