CCS-1A:
Chime Com2
Door Entry 

CCS-1A Chime Com2 Door Entry

 

Features (Back to top)

Press-to-talk door answering with automatic shut-off.
Second inside room station (separate power supply required).
Backlit CALL button.
CHIME and VOICE volume controls.
Powered by AC transformer PT-1210N.
Use QuikSpec to design this system.
 

 

Product Photos (Back to top)

Click picture to view larger image. Use the "Back" button on your browser to return to this page. Click picture to view larger image. Use the "Back" button on your browser to return to this page. Click picture to view larger image. Use the "Back" button on your browser to return to this page. Click picture to view larger image. Use the "Back" button on your browser to return to this page.
CCS-1A Boxed Set CC-1M CC-DA

 

Specifications  (Back to top)
Power Source 12 ~ 16V AC, 10VA
Power Supply 12 ~ 16V AC transformer, 10VA (w/no-load voltage rating: 20V or less).
Use PT-1210N plug -in transformer (12V AC) or PT-1610 hardwired 16V AC transformer (16V AC).
Communication 2-tone chime.  Press TALK to reply.   Hands free at door.  Times out in 15 seconds after TALK is pressed.
Wiring 2 wires, parallel, shielded, non-polarized. (Use Aiphone #822202.)
Distance 245' with 22AWG, 590' with 18AWG.

 

Click here to QuikSpec this system
Use QuikSpec to design a ChimeCom2 system

 

Literature Available (Back to top)

CCS-1A Installation and Operation Manual
PT-1210N 12V AC, 830mA Transformer Spec Sheet
PT-1610 Installation Instructions
 

Modifications Available (Back to top)

Aiphone has always recognized that there are features and functions that our products don't have. In response we've created a manual detailing the in-field customization of our units to do some of  the more frequently requested functions. Called the "Modification Manual"  and now in it's fifteenth year, it has been an invaluable source of knowledge for in field technicians. It is available free of charge for the first time here.

All modification are in PDF format and are broken down into 5 levels, based on their difficulty:

Level 1 - Easy - Wire Connection Only
Level 2 - Easy/Moderate - Component Connection to External points
Level 3 - Moderate - Removal and replacement of internal Components
Level 4 - Moderate/Hard - Internal connection or component addition
Level 5 - Hard - Circuit Creation and Internal Addition

Please note that modifying a unit will not void it's warranty unless while doing the modification you damage the unit. Aiphone is not liable for any damaged caused during modification. Modifications should only be performed by a person with the skills and knowledge necessary to successfully complete the modification.

MODIFICATION: DIFFICULTY LEVEL:
External signaling for the CC-1M 4 - Moderate/hard

For additional information contact your Aiphone Representative.
For best results use Internet Explorer or Netscape Navigator 4.0 or above.
For comments about this site: webmaster@aiphone.com
Copyright 2002 by Aiphone Corporation - All rights reserved.

Got  questions?

Use "QuikFAQ" to get instant answers!

Click the logo below to get started.